Publicacións (41) Publicacións de Rafael Barea del Cerro

2024

  1. Study of Tensile and Compressive Behavior of ECO-Mg97Gd2Zn1 Alloys Containing Long-Period Stacking Ordered Phase with Lamellar Structure

    Metals, Vol. 14, Núm. 5

2023

  1. An Evolutive-Deformation approach to enhance self-supporting areas in Additive Manufacturing designs

    Computers and Industrial Engineering, Vol. 182

  2. Modelling the anisotropic thermal conductivity of 3D logpile structures

    Journal of the European Ceramic Society, Vol. 43, Núm. 10, pp. 4462-4471

  3. On the Influence of Precipitation on the Dynamic Strain Aging in Mg-2%Nd

    JOM, Vol. 75, Núm. 7, pp. 2385-2396

  4. Room-temperature multiferroic response in BiFeO3-Bi4Ti3O12 thin film composites obtained by a sustainable method in a fully aqueous medium

    XVI Reunión Nacional de Electrocerámica

2021

  1. High-accuracy compliance correction for nonlinear mechanical testing: Improving Small Punch Test characterization

    Nuclear Materials and Energy, Vol. 26

  2. Load Partitioning Between Mg17Al12 Precipitates and Mg Phase in the AZ91 Alloy Using In-Situ Synchrotron Radiation Diffraction Experiments

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 52, Núm. 7, pp. 2732-2745

  3. Materiales en Moda

    Actas de las III Jornadas Nebrija de Transversalidad en la Docencia: 19 y 20 de junio de 2020 (Universidad Antonio de Nebrija), pp. 60-66

2020

  1. Anisotropic plastic behavior in an extruded long-period ordered structure Mg90Y6.5Ni3.5(at.%) alloy

    Crystals, Vol. 10, Núm. 4

  2. Dynamic Strain Aging (DSA) in solid solubilized Mg-Gd alloys under compression at intermediate temperatures

    Revista de metalurgia, Vol. 56, Núm. 3, pp. 175-175

  3. Sinter-hardening of chromium PM steels with concentrated solar energy

    Journal of Materials Processing Technology, Vol. 280

2019

  1. Effect of precipitation in the compressive behavior of high strength Mg-Gd-Y-Zn extruded alloy

    Materials Science and Engineering A, Vol. 768

  2. Increase in the mechanical strength of Mg-8Gd-3Y-1Zn alloy containing long-period stacking ordered phases using equal channel angular pressing processing

    Metals, Vol. 9, Núm. 2

  3. Prevalence of vascular risk factors in patients with and without type 2 diabetes mellitus admitted to hospital for stroke in the 2011-2013 period

    Endocrinologia, Diabetes y Nutricion, Vol. 66, Núm. 3, pp. 150-156

2018

  1. A geometrical robust design using the Taguchi method: application to a fatigue analysis of a right angle bracket

    DYNA: revista de la Facultad de Minas. Universidad Nacional de Colombia. Sede Medellín, Vol. 85, Núm. 205, pp. 37-46

  2. Determination of the instantaneous strain rate during small punch testing of 316 L stainless steel

    International Journal of Mechanical Sciences, Vol. 149, pp. 93-100

  3. Estudio de la evolución del espesor en ensayos de Small Punch Test

    Revista de metalurgia, Vol. 54, Núm. 1, pp. 110

  4. Evolución microestructural y envejecimiento dinámico por deformación en la aleación Mg-6%Gd- 1%Zn durante ensayos a tracción y compresión a temperaturas intermedias

    Revista de metalurgia, Vol. 54, Núm. 3, pp. 124

  5. Maintaining high strength in Mg-LPSO alloys with low yttrium content using severe plastic deformation

    Materials, Vol. 11, Núm. 5

2016

  1. Determinación del criterio de rotura de Drucker-Prager de compactos en verde de α-SiC

    Boletín de la Sociedad Española de Cerámica y Vidrio, Vol. 55, Núm. 3, pp. 114-120