Centro Nacional de Investigaciones Metalúrgicas -ko ikertzaileekin lankidetzan egindako argitalpenak (16)

2024

  1. Study of Tensile and Compressive Behavior of ECO-Mg97Gd2Zn1 Alloys Containing Long-Period Stacking Ordered Phase with Lamellar Structure

    Metals, Vol. 14, Núm. 5

2023

  1. On the Influence of Precipitation on the Dynamic Strain Aging in Mg-2%Nd

    JOM, Vol. 75, Núm. 7, pp. 2385-2396

2021

  1. High-accuracy compliance correction for nonlinear mechanical testing: Improving Small Punch Test characterization

    Nuclear Materials and Energy, Vol. 26

  2. Load Partitioning Between Mg17Al12 Precipitates and Mg Phase in the AZ91 Alloy Using In-Situ Synchrotron Radiation Diffraction Experiments

    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 52, Núm. 7, pp. 2732-2745

2020

  1. Anisotropic plastic behavior in an extruded long-period ordered structure Mg90Y6.5Ni3.5(at.%) alloy

    Crystals, Vol. 10, Núm. 4

2019

  1. Effect of precipitation in the compressive behavior of high strength Mg-Gd-Y-Zn extruded alloy

    Materials Science and Engineering A, Vol. 768

  2. Increase in the mechanical strength of Mg-8Gd-3Y-1Zn alloy containing long-period stacking ordered phases using equal channel angular pressing processing

    Metals, Vol. 9, Núm. 2

2018

  1. Determination of the instantaneous strain rate during small punch testing of 316 L stainless steel

    International Journal of Mechanical Sciences, Vol. 149, pp. 93-100

  2. Estudio de la evolución del espesor en ensayos de Small Punch Test

    Revista de metalurgia, Vol. 54, Núm. 1, pp. 110

  3. Evolución microestructural y envejecimiento dinámico por deformación en la aleación Mg-6%Gd- 1%Zn durante ensayos a tracción y compresión a temperaturas intermedias

    Revista de metalurgia, Vol. 54, Núm. 3, pp. 124

  4. Maintaining high strength in Mg-LPSO alloys with low yttrium content using severe plastic deformation

    Materials, Vol. 11, Núm. 5

2013

  1. Hot forming of a new steel used in stamping dies and tooling

    International Journal of Materials Research, Vol. 104, Núm. 3, pp. 281-285

2009

  1. Above Burden Temperature Data Probes Interpretation to Prevent Malfunction of Blast Furnaces - Part 2: Factory Applications

    Steel Research International, Vol. 80, Núm. 3, pp. 194-201

2008

  1. Extended use of helium tracing technique and assessment of blast furnace shaft permeability

    Ironmaking and Steelmaking, Vol. 35, Núm. 1, pp. 51-55

2007

  1. Hot metal temperature prediction in blast furnace using advanced model based on fuzzy logic tools

    Ironmaking and Steelmaking

2006

  1. Fuzzy control of micum strength for iron ore sinter

    ISIJ International, Vol. 46, Núm. 5, pp. 687-693